Water jetting system SEAKA multicat
OSD-IMT was initially contracted by The Marina Group to design the structural alterations required for installing a jetting pump and engine into the SEAKA. The SEAKA was an existing work boat previously built by Southampton Marine Services. All works were to be carried out to SSC rules with the goal of certifying the vessel. Once work on the project had begun The Marina Group engaged OSD-IMT to design the jetting system pipe work, arms and jetting head. This is all detachable and can be removed for road transport if required. Care was taken through the whole project to ensure that the stability of the vessel was not compromised with excessive VCG growth and that the minimum allowable freeboard was not breached.